Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • WA Electrical Contractor Lic. #HOMECCA782DC • NATE-certified technicians • Carrier Factory Authorized Dealer • Mitsubishi Electric Diamond Dealer • Lennox Premier Dealer
Furnace replacement in Lynnwood, WA
Home Comfort Alliance replaces natural gas and electric furnaces in Lynnwood homes, scheduled from our Everett branch. Each replacement starts with a free in-home estimate: a room-by-room heat-loss calculation, a check of the ducts, venting and gas line, and a written page of options with model numbers, rebates and monthly payments side by side.
Lynnwood grew fast from the 1960s through the Alderwood Mall years, so many homes are old enough that an original furnace would be well past its expected life. The right replacement depends on which utility serves you. Gas comes from Puget Sound Energy and electricity from Snohomish County PUD, and the two utilities reward different choices: PSE pays toward a heat pump added to a gas furnace, while the PUD pays toward heat pumps in electrically heated homes.
Bottom line: if the furnace is 15 years or older, needs a major part, or can’t keep every room comfortable, get a replacement price next to the repair price. We will show you a new furnace and a heat pump option so you can compare cost to install and cost to run.
Furnace replacement cost
No Lynnwood-only survey is published, so these are regional estimates from Seattle-area data.
| Furnace | Installed cost (Seattle area) |
|---|---|
| Average new furnace | About $4,683 |
| Most installations | $2,762 to $6,683 |
| Natural gas furnace | $3,800 to $10,000 |
| Electric furnace | $2,000 to $7,000 |
Source: Angi, Seattle new furnace costs, updated July 2026. Regional estimate, not a quote. Your price moves with efficiency, where the furnace sits, venting changes, duct repairs, and whether cooling is added at the same time.
Which replacement fits your utilities
| Your home | Options we price | Rebate to check (September 2026) |
|---|---|---|
| PSE gas furnace | High-efficiency gas furnace, or dual fuel (heat pump plus furnace) | PSE hybrid heat pump: $1,500, plus up to $2,400 Efficiency Boost |
| Electric furnace on PUD power | Ducted heat pump with electric backup | Snohomish PUD: $1,800 conversion model or $2,500 inverter-driven model |
| Electric furnace, want lowest upfront cost | Like-for-like electric furnace | None |
Sources: PSE hybrid heat pump rebate; Snohomish County PUD heating rebates (updated July 1, 2026). The PUD rebate requires electric heat as the primary heat source and a PUD registered contractor; it is applied on your invoice. Home Comfort Alliance is an approved Snohomish PUD contractor and a PSE Trade Ally approved contractor for HVAC systems. The federal 25C tax credit ended December 31, 2025.
Furnace or heat pump: running costs
The purchase price is only half the comparison. A gas furnace turns 80 to 98 percent of the gas it burns into heat, depending on its efficiency rating. A heat pump moves heat rather than making it, so on a typical mild Puget Sound winter day it delivers several units of heat for each unit of electricity. Which costs less to run in your house depends on current PSE gas and PUD electric rates, your insulation and how you set the thermostat. During the estimate we calculate an annual running cost for each option using your home’s heat loss, so you can weigh install price, rebates and yearly bills together. Many gas homes land on dual fuel: the heat pump carries most of the season and the furnace handles the coldest hours.
Signs your furnace should be replaced
- It is 15 or more years old and the latest repair estimate is large.
- The same parts keep failing: igniters, inducer motors, pressure switches, control boards.
- Rooms at the far end of the house stay cold even after duct fixes.
- Heating bills rise year after year with similar weather.
- You hear booming at start-up or see soot around the burners or flue.
- A technician has found a cracked heat exchanger, which is a carbon monoxide risk and means replacement.
Sizing, venting and ductwork
We size the new furnace from a heat-loss calculation, not the old nameplate. Windows, insulation and additions change what a house needs, and an oversized furnace short-cycles, wears out faster and leaves rooms uneven. A static pressure test tells us whether the ducts can deliver the airflow the new unit needs; when they can’t, a bigger return or sealed duct joints often do more for comfort than any furnace upgrade, and we price that as an optional line.
Venting is planned before install day. A 95% condensing furnace vents cool exhaust through PVC and needs a drain for condensate; an 80% furnace uses a metal flue. If an old furnace shared a chimney with a gas water heater, switching to a condensing furnace can leave the water heater alone in an oversized flue, which we check and correct.
What every replacement includes
- Removal and disposal of the old furnace.
- A new filter rack sized for easy filter changes.
- Gas leak test and a combustion analysis on gas units.
- Condensate drain or pump for condensing furnaces, routed so it can’t back up or freeze.
- Thermostat setup and a walk-through of filter changes and settings.
- Permit, inspection and rebate paperwork handled by us.
- Manufacturer warranty registration.
Permits and install day
Furnace replacement in Lynnwood needs a mechanical permit from the city (City of Lynnwood, Guide to Getting a Permit), and electrical work is permitted and inspected by the City of Lynnwood itself (City of Lynnwood, electrical permits). Unincorporated Snohomish County addresses use county and L&I permits. We pull them all.
- Free estimate and written options.
- Permit pulled and install scheduled; most replacements take one day.
- Old furnace removed and hauled away; new furnace, venting, gas and electrical connected.
- Combustion analysis, temperature rise and safety checks; thermostat setup and a walk-through.
- Inspection passed and rebate paperwork filed.
Timing and financing
Replacing a failing furnace before the first cold week gives you the widest choice of install dates and time to line up rebates. If it fails in the middle of winter, we give you the earliest install date available and explain any repair that could bridge the gap. Every estimate shows the cash price and a monthly payment on approved credit side by side; see financing. Considering a heat pump instead? Compare on heat pump installation in Lynnwood, or see heating repair in Lynnwood if your furnace may only need a part.
Get a free estimateAn in-home visit and a written, upfront price before any work begins.
Warranty and Home Comfort Club
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our furnace installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and a new system we install gets extended labor coverage for as long as your membership stays active, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
Lynnwood furnace replacement FAQ
How much does a new furnace cost in Lynnwood?
Seattle-area data shows an average of about $4,683 installed, with most jobs between $2,762 and $6,683 (Angi, July 2026). Gas furnaces typically cost more than electric. Our in-home estimate is free.
Who is my gas utility in Lynnwood?
Puget Sound Energy supplies natural gas in Lynnwood; electricity comes from Snohomish County PUD.
Can I get a rebate on a new furnace in Lynnwood?
Rebates focus on heat pumps. PSE gas customers can get $1,500, plus up to $2,400 through Efficiency Boost, for adding a heat pump to a gas furnace. Electrically heated homes can get $1,800 or $2,500 from Snohomish PUD for a qualifying ducted heat pump (as of September 2026).
Do I need a permit to replace a furnace in Lynnwood?
Yes. A mechanical permit from the City of Lynnwood, plus a city electrical permit if wiring changes. We handle both.
How long does furnace replacement take?
Most replacements are done in one day; relocations, venting changes or adding a heat pump can take two.
Should I pick an 80% or 95% furnace?
A 95% condensing furnace uses less gas and suits a long heating season, but needs PVC venting and a condensate drain. An 80% furnace costs less up front and can use a metal flue. We show both prices and running costs.
What happens to my old furnace?
We disconnect it safely, remove it from the home and haul it away for recycling as part of the installation.
Can I add air conditioning when I replace my furnace?
Yes. Adding a heat pump instead of a standalone AC gives you cooling plus efficient heat, and as a PSE gas customer it may qualify for the PSE hybrid rebate.
What warranty comes with your work?
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) with a new system installed by Home Comfort Alliance get extended labor coverage for as long as their membership stays active, up to 5 years from installation.
Why Choose Home Comfort Alliance in Lynnwood?
Your Comfort is Our Promise
We promise...
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
Get a furnace replacement estimate in Lynnwood
An Everett-based comfort advisor will measure your home and give you written options with PSE and PUD rebates and financing.
Get an estimate
An Everett-based comfort advisor will call you to set up your visit.