





Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • NATE-certified technicians • Carrier Factory Authorized Dealer
A heat pump heats and cools your home with one system by moving heat rather than burning fuel. Home Comfort Alliance installs, repairs and maintains ducted, ductless and dual-fuel heat pumps in Issaquah from our Redmond branch. Call (425) 645-0404 for a free installation estimate.
Issaquah homeowners have an unusual advantage: the city is part of Energy Smart Eastside, a heat pump campaign it runs with Bellevue, Kirkland, Mercer Island, Redmond and Sammamish (Energy Smart Eastside, heat pump incentives). Combined with Puget Sound Energy rebates, it can take a meaningful share off the cost of switching. Home Comfort Alliance is an Energy Smart Eastside approved contractor and a PSE Trade Ally.
Source: Energy Smart Eastside, heat pump incentives. The City of Issaquah describes the steps as signing up, attending a virtual workshop and having your home assessed before installation (City of Issaquah, Energy Smart Eastside). We can guide you through each step.
Which combination of Energy Smart Eastside and PSE incentives applies depends on your current heat, equipment brand and household income. We check eligibility for your address before you commit. PSE heating rebates require a PSE Trade Ally or registered installer, and several programs have application windows after installation, so we track the paperwork and deadlines as part of the job rather than leaving them to you.
Seattle-area estimates before incentives, from Angi, Seattle heat pump installation costs, updated July 2026 and Angi, Seattle mini-split costs, 2026 data. Not our prices.
| System | Installed cost range |
|---|---|
| Standard efficiency, ducted | $3,160 to $6,670 |
| High efficiency, ducted | $6,670 to $13,850 |
| Premium efficiency, ducted | $13,850 to $20,000 |
| Seattle-area average, ducted | About $10,218 |
| Ductless mini-split, single zone | $2,222 to $5,555 |
Get a free estimateAn in-home visit and a written, upfront price before any work begins.
Your current heating decides the most sensible path:
| Current heat | Recommended setup | Incentives that may apply |
|---|---|---|
| Electric baseboards | Ductless mini-split, several zones | Energy Smart Eastside; PSE electric heat conversion |
| Electric furnace with ducts | Ducted heat pump and air handler | Energy Smart Eastside; PSE electric heat conversion |
| PSE gas furnace, keeping it | Dual fuel (hybrid) | Energy Smart Eastside $1,000; PSE hybrid |
| PSE gas furnace, going all-electric | Ducted heat pump, electric backup | Energy Smart Eastside, including bonus if income-qualified |
The Energy Smart Eastside bonus requires a fully electric system with no furnace backup, so households that qualify for it should weigh going all-electric carefully with us.
Both are heat pumps; the difference is how conditioned air reaches the rooms.
For Issaquah’s many multi-level homes, a ducted system can be zoned, or a second small system added for the upper floor, rather than oversizing one unit to cover everything.
If your water heater is near the end of its life, consider replacing it with a heat pump water heater at the same time. It uses much less electricity than a standard electric tank, and PSE offers $1,000, or $1,100 with Efficiency Boost, on qualifying models (PSE heat pump water heater rebate). Planning both together lets our electricians size the panel work once. Our Issaquah plumbing page covers water heater options.
A heat pump is usually a strong fit when you heat with electric resistance, want to add cooling, or are replacing an old AC anyway. It needs a closer look when the ductwork is undersized or leaky, when the panel is at capacity, or when you plan to keep an efficient gas furnace for years. We give a straight answer at the estimate, including when a furnace repair or a dual-fuel setup makes more sense than going all-electric.
Variable-speed heat pumps keep heating well below freezing, though output drops as temperatures fall. We size for your home’s heat loss at design temperature and plan backup heat accordingly: electric strips in all-electric systems, or the gas furnace in dual-fuel systems. We also set the thermostat so modest setbacks do not call for backup heat every morning, which protects the savings.
A heat pump needs a 240-volt circuit and disconnect; an all-electric system with backup strips needs more capacity still. Before quoting, our electricians check the panel with a load calculation and recommend load management, a subpanel or a service upgrade only when needed. This matters most for households going fully electric for the Energy Smart Eastside bonus.
Issaquah generally requires a mechanical permit from the City of Issaquah Permit Center for heat pump installs, plus an L&I electrical permit for new wiring (City of Issaquah, Do I Need a Permit?; City of Issaquah, electrical permits). We file both. A ducted install usually takes one to two days, a single-zone ductless system about a day. Before leaving, we pressure-test and evacuate the lines, verify charge and airflow, set up the thermostat, and walk you through filters and settings.
Already have a heat pump? We repair and maintain ducted and ductless heat pumps, including capacitors, contactors, refrigerant leaks, defrost controls, reversing valves, fan motors and ductless drain lines. Because heat pumps run in both seasons, schedule a fall check before heating season and, if you rely on cooling, a spring check too. Between visits, keep filters clean and keep two feet of clearance around the outdoor unit, trimming back shrubs and clearing needles and moss after storms.
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our heat pump installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and a new system we install gets extended labor coverage for as long as your membership stays active, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
A heat pump campaign run by Issaquah with Bellevue, Kirkland, Mercer Island, Redmond and Sammamish. It offers a $1,000 rebate on qualifying heat pumps installed by approved contractors, plus a bonus of up to $5,000 for moderate-income households going fully electric.
Yes. We are an approved contractor and a PSE Trade Ally for HVAC.
Mitsubishi, Bryant/Carrier and Day & Night, ducted or ductless.
That depends on your current heat, equipment and income. We check which incentives apply to your project before you commit.
Seattle-area data puts ducted heat pumps between about $3,160 and $20,000 depending on efficiency, averaging about $10,218, before incentives (Angi, July 2026).
Generally yes: a City of Issaquah mechanical permit and an L&I electrical permit. We handle both.
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) with a new system installed by Home Comfort Alliance get extended labor coverage for as long as their membership stays active, up to 5 years from installation.

A Redmond-based comfort advisor will size the system, confirm your Energy Smart Eastside and PSE incentives and give you written options with financing.
Get an estimate
A Redmond-based comfort advisor will call you to set up your visit.