





Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • WA Plumbing Contractor Lic. #HOMECCA751QG • NATE-certified technicians • Carrier Factory Authorized Dealer
Our licensed plumbers repair leaks, clear drains, replace water heaters and fixtures, and repipe homes across Issaquah. They work out of our Redmond branch; call (425) 645-0404 or use the form, and a coordinator will book a visit at a time that suits you. You get a written price before any work starts.
Issaquah has grown a lot in the last few decades. Most of its plumbing is therefore 10 to 30 years old: modern materials, but water heaters, valves, supply hoses and fixtures from the original build are now wearing out, often all around the same time in a given neighborhood.
Our prices (as of September 2026). Plumbing repairs are quoted by the plumber on site before any work begins.
| Service | Our price |
|---|---|
| Plumbing dispatch (trip) fee | $99 |
| Drain cleaning, indoor drains | $148, plus the dispatch fee |
| Hydro jet drain cleaning | $399 to $574 |
| Standard water heater flush | $150 |
| Tankless water heater flush | $429 |
For comparison, regional estimates:
Seattle-area estimates from Angi, Seattle plumber costs, updated July 2026. These are not Home Comfort Alliance prices.
| Job | Typical range |
|---|---|
| General plumbing repair | $284 to $760, about $522 typical |
| Plumber hourly rate | $150 to $200 |
| Faucet replacement | $150 to $600 |
| Toilet installation | $300 to $800 |
| Water heater installation | $800 to $2,000 |
| Main water line leak | $600 to $4,500 |
In Issaquah, finished basements and homes built into slopes can make pipes harder to reach, which affects labor time. We explain access before quoting. Other things that move the price: whether the part is in stock on the truck, whether drywall or flooring must be opened and patched, and whether the job needs a City of Issaquah permit and inspection. Replacing several aging parts in one visit, such as all the supply hoses and shutoff valves in a bathroom, usually costs less than separate calls as each one fails.
Get an estimateA comfort advisor will call you to set up your visit.
Issaquah is one of the rainier spots on the Eastside, and many homes sit on slopes where groundwater moves downhill toward foundations. That makes working drainage part of plumbing here:
Issaquah homes get natural gas and electricity from Puget Sound Energy, so all three types are options:
| Type | Good fit when | Notes |
|---|---|---|
| Gas tank | You have PSE gas and a vented location | Lowest upfront cost; gas units in single-family homes can be permitted over the counter |
| Tankless gas | You want endless hot water and wall space | Needs proper gas line size and venting; annual flushing recommended |
| Heat pump water heater | You have a garage or large utility room | Uses much less electricity than a standard electric tank; PSE rebate of $1,000 ($1,100 with Efficiency Boost) |
Rebate source: PSE heat pump water heater rebate. Permits: the City of Issaquah requires a plumbing permit for an electric water heater, and gas water heaters are permitted through the city as well (City of Issaquah, mechanical permits). We file them.
Many Issaquah homes built in the 1990s and 2000s are now due for their first kitchen or bathroom remodel. Plumbing is where remodel budgets most often surprise people, so we recommend bringing a plumber in during planning, not after demolition. Moving a sink to an island, converting a tub to a walk-in shower, or adding a bathroom to a basement each changes drain slope, venting and water supply. Our plumbers rough in new lines, set fixtures, and pull the City of Issaquah plumbing permit for the work, coordinating with your contractor so walls and floors are opened only once.
In larger two-story homes, the kitchen or primary bathroom is often a long pipe run from the water heater, and waiting for hot water wastes both time and water. Options include a recirculation pump with a timer or demand button, a crossover valve under the farthest sink that uses the cold line as a return, or a small point-of-use heater. We look at your layout and explain the trade-offs in running cost and convenience before recommending one.
Recurring clogs usually mean something further down the line: grease, roots, a sag or a failing connection. We clear indoor drains, including the main drain line from an indoor cleanout. We don’t do sewer line work, so if the trouble is in the sewer line itself, we’ll tell you so you can call a sewer contractor. On homes with failing supply pipe, we repipe with modern materials and patch access points neatly.
Automatic shutoff valves that close the main when a sensor detects a leak are worth considering for homes that sit empty for long stretches. Ask the plumber about options on your next visit.
When you book, the coordinator notes what you are seeing so the plumber arrives prepared. On site, the plumber finds the cause, explains the options, and gives you a written price for each. After the repair, we test for leaks and flow, and clean up. You also get a short note of anything else the plumber noticed, such as a water heater nearing the end of its life or a corroded valve, so you can plan ahead rather than react. If a larger issue shows up during the visit, we tell you before doing anything more.
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our plumbing installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and a new system we install gets extended labor coverage for as long as your membership stays active, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
Our plumbing dispatch fee is $99, and the plumber quotes any repair on site before work begins. Drain cleaning is $148 (the dispatch fee is charged separately) and a standard water heater flush is $150 (prices as of September 2026). For comparison: Seattle-area data puts most plumbing repairs between $284 and $760, about $522 typical, and plumber rates around $150 to $200 an hour (Angi, 2026). We give a written price before work starts.
Yes. PSE offers $1,000, or $1,100 with Efficiency Boost, for qualifying heat pump water heaters.
Yes. The City of Issaquah requires a plumbing permit for an electric water heater, and gas water heaters are permitted too. We file the permit.
That is usually water hammer from high pressure or a failed pressure-reducing valve. A plumber can test the pressure and replace the valve or add arrestors.
Yes. We test, repair and replace sump pumps and can add a battery backup.
Yes. We install tank, tankless and heat pump water heaters and help you compare them.
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) with a new system installed by Home Comfort Alliance get extended labor coverage for as long as their membership stays active, up to 5 years from installation.

A Redmond-based coordinator will set up your visit, and our plumber will give you a written price before any work starts.
Get an estimate
A Redmond-based comfort advisor will call you to set up your visit.