Heating Services in Kingston, WA
Furnace, heat pump and ductless heating for Kingston homes on electric, propane or oil: repairs, tune-ups and replacements with PSE rebates handled.
Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • NATE-certified technicians • Carrier Factory Authorized Dealer • Mitsubishi Electric Diamond Dealer
Heating services in Kingston, WA
Home Comfort Alliance repairs, maintains and replaces heating systems in Kingston from our Bremerton branch: electric, propane and oil furnaces, heat pumps, ductless systems and dual fuel setups, plus boiler service. Installation estimates are free; repair visits start with a posted $119 trip fee and a written price before work.
Call (425) 645-0404 or use the form at the bottom of the page. Our phones are answered and bookings are accepted 24/7. Heating and cooling technicians work during business hours and are available after hours for qualifying emergencies ($330 after-hours fee).
Smell propane or a strange gas odor? Get everyone out, leave doors open, and do not use switches or phones inside. From outside, call your propane supplier or 911. Call us once the home is cleared.
Kingston has no gas lines: what that means for your heat
Kingston has no natural gas utility: Puget Sound Energy lists Kitsap County as electric-only service, and Cascade Natural Gas does not list Kingston among its communities. Kingston homes heat with electricity, propane, oil or a heat pump. So most furnace calls here are electric, propane or oil, and most upgrades are heat pumps.
| Heating now | What usually goes wrong | Common next step |
|---|---|---|
| Electric furnace | Elements, sequencers, relays, burnt wiring | Repair, or a ducted heat pump with PSE's $1,500 conversion rebate |
| Electric baseboards | Failed thermostats, high bills | Ductless heat pump, same PSE rebate |
| Propane furnace | Ignitor, flame sensor, gas valve, venting | Repair, or a dual fuel heat pump |
| Oil furnace | Nozzle, filter, ignition, flame sensing | Tune-up, or a heat pump conversion |
| Heat pump | Capacitors, contactors, defrost, refrigerant leaks | Heat pumps in Kingston |
Heating repair prices
| Item | Home Comfort Alliance price |
|---|---|
| Dispatch (trip) fee | $119 |
| Standard / deeper diagnostic | $72 / $130 |
| After-hours fee, qualifying emergencies | $330 |
| Ignitor replacement (propane furnaces) | $353 to $821 |
| Thermostat replacement | $299 to $1,840 |
Prices as of October 2026.
Regional benchmark, not our price: Angi puts most Seattle-area furnace repairs at $139 to $544, averaging $341 (August 2026, Angi). Offers: $50 Off Emergency No Heat Calls or $50 off HVAC service or repair (special offers; not combined with Club pricing).
Before you book: quick checks
- Thermostat on HEAT, a few degrees above the room, with fresh batteries.
- Furnace and outdoor unit breakers on; after a windstorm outage, check that nothing tripped when power came back.
- A clean filter and the furnace door shut tight.
- Propane tank above empty, or oil in the oil tank. Press an oil burner's reset button once only.
- Heat pump outdoor unit clear of branches and leaves.
Tune-ups for the wet season
| Tune-up | Price | Home Comfort Club price |
|---|---|---|
| Furnace tune-up | $230 | $180 |
| Heat pump tune-up, per piece of equipment | $230 | $180 |
| Oil furnace tune-up | $336 | $288 |
A furnace tune-up covers the thermostat, flue and piping, motors, controls and wiring, safety controls, the blower, supply and return temperatures, burners and a final run test. Home Comfort Club HVAC plans are $15 a month (membership plans).
Replacing your heating: cost, rebates and financing
Your price depends on your home's heating and cooling needs, the add-ons you need, how many rooms the system serves and where it's installed. Get a price range in about 30 seconds with our free instant quote tool, then a technician confirms the exact price on a free site visit.
As of October 2026, PSE pays $1,500 to replace electric resistance heat with a heat pump and $1,500 to upgrade an out-of-warranty ducted all-electric heat pump, each with up to $2,400 more through Efficiency Boost, and takes $300, $400 or $600 off qualifying units at purchase. There is no gas utility rebate in Kingston, and PSE has no rebate for new propane or oil furnaces. The federal 25C tax credit ended for equipment installed after December 31, 2025. Home Comfort Alliance is a PSE Trade Ally and handles the rebate paperwork for you.
Most furnace installations take between 4 and 10 hours. New installations come with a 3-year Comfort Shield labor warranty on new installations, kept active with yearly maintenance. First-year maintenance is included. Financing through Salal Credit Union or Synchrony starts at $179/month* (financing).
*Financing through Salal Credit Union or Synchrony, subject to credit approval. Rates, terms and monthly payments depend on the amount financed, the plan and your credit. 0% interest options are available to qualifying customers. See lender for full terms.
Get a free estimateAn in-home visit and a written, upfront price before any work begins.
Permits in Kingston
Kingston is unincorporated, so Kitsap County issues mechanical permits. The county requires a mechanical permit for heating work except appliance repair, and a permit to install or move gas lines, which covers propane piping (Kitsap County permit guide). Electrical permits come from Washington L&I. A part repair normally needs no permit; replacing a furnace or heat pump does, and we pull the required permits for every installation.
A recent Kingston visit: first-year maintenance before the rains
In September we serviced a Carrier ducted heat pump and air handler in Kingston, about a year after installation. Our technician changed the 20x20x4 filter, brushed out the condensate trap, and inspected the blower wheel and motor bearings.
He tightened the electrical connections, checked both coils and the refrigerant line set for damage or oil, and confirmed supply voltage at 240 volts. First-year maintenance is included with every new installation and keeps the Comfort Shield labor warranty active.
From our September 2026 maintenance records; customer details are kept private.
Where we provide heating service around Kingston
All of Kingston, ZIP 98346, including downtown Kingston, Appletree Cove, Jefferson Point, Taree and Arborwood, and nearby Poulsbo and Bainbridge Island, from our Bremerton branch. See all Kingston services.
Kingston heating FAQ
What heating systems do you service in Kingston?
Electric, propane and oil furnaces, heat pumps, ductless mini-splits and dual fuel systems, repaired, maintained and replaced, plus boiler service. We do not install new boilers.
Is there natural gas in Kingston, WA?
No. PSE lists Kitsap County as electric-only service, and Cascade Natural Gas does not list Kingston, so homes heat with electricity, propane, oil or heat pumps.
How much does furnace repair cost in Kingston?
A repair visit has a $119 dispatch (trip) fee plus a $72 standard diagnostic, or $130 for a deeper one; qualifying after-hours emergencies add a $330 after-hours fee. The repair is priced in writing before work begins.
Do you repair propane and oil furnaces?
Yes. An oil furnace tune-up is $336, or $288 for Home Comfort Club members, and a propane or electric furnace tune-up is $230 ($180 Club).
What is the best way to replace oil or electric heat in Kingston?
Usually a heat pump: ductless for homes with baseboards and no ducts, ducted for homes with an electric or oil furnace and sound ducts. PSE pays $1,500 to convert electric resistance heat, and qualifying heat pumps get an instant discount of $300 to $600.
Do I need a permit for heating work in Kingston?
Kitsap County requires a mechanical permit for heating work except appliance repair, so a part repair normally needs none, while a furnace or heat pump replacement does. Electrical permits come from Washington L&I.
Do you offer after-hours heating service in Kingston?
Our phones are answered and bookings are accepted 24/7. Heating and cooling technicians work during business hours and are available after hours for qualifying emergencies ($330 after-hours fee). No heat in cold weather is a qualifying emergency.
Do heat pumps work in Kingston winters?
Yes. The winter design temperature for nearby Bremerton is 29°F, well within what cold-climate heat pumps handle, and a propane or oil furnace can stay as backup.
Do you remove oil tanks?
No. If you convert from oil, you hire a certified tank decommissioner for the tank; we handle the heating system.
Is the federal tax credit for heating upgrades still available?
No. The federal 25C credit ended for equipment installed after December 31, 2025. PSE rebates are still available.
Is Home Comfort Alliance licensed?
Yes. WA Contractor Reg. #HOMECCA785BD and WA Electrical Contractor Lic. #HOMECCA782DC; licensed, bonded and insured in Washington, NATE-certified technicians, locally owned since 1977.
Sources (checked October 26, 2026): PSE service area map; Cascade Natural Gas, communities served; Kitsap County DCD, Do I Need a Building Permit?; PSE, electric resistance to heat pump rebate; PSE, heat pump to heat pump upgrade rebate; PSE, instant discounts; Angi, Seattle furnace repair cost (August 2026).
Why Choose Home Comfort Alliance in Kingston?
Your Comfort is Our Promise
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
Get a heating estimate in Kingston
Tell us how your home heats today, and our Bremerton team will set up a repair visit or a free in-home estimate with a written, upfront price.
Request heating service
We will call you to set up the visit. For no heat after hours, call (425) 645-0404.