Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • WA Electrical Contractor Lic. #HOMECCA782DC • NATE-certified technicians • Carrier Factory Authorized Dealer • Mitsubishi Electric Diamond Dealer • Lennox Premier Dealer
Bellevue electrical service from our Redmond team
Home Comfort Alliance's licensed electricians repair, upgrade and inspect electrical systems in Bellevue homes, with the price before any work begins. PSE supplies electricity across Bellevue, and the City of Bellevue issues and inspects its own electrical permits. Book 24/7 by phone or online. Our electricians work Monday to Friday, 8 AM to 5 PM, with same-day service when possible. We work under WA Electrical Contractor License #HOMECCA782DC and WA Contractor Registration #HOMECCA785BD; licensed, bonded and insured in Washington.
Sparks, smoke or a burning smell? Leave the area and call 911. For a downed line or power problem outside your home, call PSE at 1-888-225-5773. Then book us to repair your wiring once it's safe.
What our Bellevue electricians fix
| Problem or project | What we do |
|---|---|
| Dead outlets and switches | Trace the fault, repair wiring, replace devices; add GFCI protection where code calls for it |
| Breakers that trip or won't reset | Find the overload or fault, replace failing breakers, split overloaded circuits |
| Flickering or dimming lights | Check connections, circuits and the panel; tell you if the cause is on the utility side |
| New circuits | Dedicated circuits for ovens, water heaters, heat pumps and workshop tools |
| Lighting and ceiling fans | Recessed lights, fixtures and fans, including new boxes rated for the load |
| Electrical panels | Replacements and upgrades with Square D, Eaton and Siemens panels or smart panels (panel upgrades) |
| EV chargers | Level 2 charger circuits and load checks (EV charger installation) |
| Generators and transfer switches | Generac and other major generator brands (generators) |
| Smoke and CO detectors | Hardwired detector replacement |
| Whole-home inspections | A room-by-room electrical check with written findings |
How much does an electrician cost in Bellevue?
| Service | Price |
|---|---|
| Electrical dispatch fee, includes a 30-minute diagnostic | $179 |
| Outlet replacement | $104 |
| Breaker replacement | $171 |
| Ceiling fan replacement | $495 |
| Smoke detector | $46.50 ($36 for Club members) |
| Generator maintenance | $465 |
| Panels, EV chargers, new circuits | Quoted on site before any work begins |
Prices as of September 2026. Fees are listed separately, never added into one price.
Current offers: 10% off electrical service or repair, $200 off an electrical panel upgrade, $200 off an EV charger install and $1,000 off generators (offers). Offers can't be combined with Club pricing.
National estimate, not our price: Angi puts the average cost to hire an electrician at $351, with most jobs between $163 and $538 (Angi, August 2026).
Members of the Home Comfort Club electrical plan pay $15 a month and get a whole-home electrical inspection.
Financing through Salal Credit Union or Synchrony starts at $179/month* (financing).
*Financing through Salal Credit Union or Synchrony, subject to credit approval. Rates, terms and monthly payments depend on the amount financed, the plan and your credit. 0% interest options are available to qualifying customers. See lender for full terms.
Get an estimateA comfort advisor will call you to set up your visit.
Electrical permits in Bellevue
The City of Bellevue issues and inspects electrical permits, including panel changes, added panels, generators and EV charging stations. Applications go through MyBuildingPermit.com, and simple permits with no plan review can often be issued the same day (City of Bellevue electrical permits). We pull the required permits for our work.
Working with PSE
For a panel or service upgrade, PSE energizes the new service only after it passes electrical inspection, and only PSE sets or removes the meter; the meter base and mast belong to the homeowner (PSE Customer Construction Services, 1-888-321-7779). We coordinate the inspection and PSE's part of the job.
Older Bellevue panels and wiring
Bellevue's housing runs from 1950s and 1960s ramblers in neighborhoods such as Lake Hills to large newer homes and condos. In older houses, 100-amp panels and full breaker boxes are the usual limit when you add an EV charger, a heat pump or a remodeled kitchen. Federal Pacific and Zinsco panels still turn up and are worth replacing. In condos, panel and service changes also depend on the building and its HOA, so we check those rules before quoting.
Panels, EV chargers and generators
PSE offers up to $300 for a qualifying ENERGY STAR smart Level 2 charger, and income-qualified customers can get up to $600 plus up to $2,000 toward installation; apply within 60 days of installation (PSE EV charger rebate, read November 4, 2026). The federal 30C credit ended June 30, 2026. We currently offer $200 off an EV charger install and $200 off an electrical panel upgrade. Bigger projects have their own pages: panel upgrades, EV charger installation and standby generators.
How a Bellevue electrical visit works
- Schedule a visit by phone or online at any hour.
- An electrician from our Redmond branch arrives on a weekday, 8 AM to 5 PM.
- The $179 visit covers the first 30 minutes of troubleshooting.
- We write up the price and you approve it before any work.
- We complete the repair and test every circuit we touched.
A recent Bellevue electrical job
In October 2026 a Bellevue homeowner (98008) bought a new range that needed a 50-amp circuit the kitchen didn't have. Our electrician added a 50-amp breaker in the panel and ran new wire from the panel through the garage and attic, then down the kitchen wall to a new receptacle at the oven location, ready for the range to plug in.
What you get with Home Comfort Alliance
A written price before any work begins, a $179 visit that includes 30 minutes of diagnosis, licensed electricians from our Redmond branch, and the same company for your heating, cooling and plumbing. Since 1977.
Where we work in Bellevue
We cover every part of Bellevue, including Crossroads, Lake Hills, Eastgate/Factoria, Newport, Somerset, Woodridge, Bridle Trails, Northeast Bellevue, West Bellevue and Wilburton/BelRed (ZIPs 98004 to 98008). Nearby: Redmond, Kirkland, Issaquah and Mercer Island.
Bellevue electrician FAQ
How much does an electrician cost in Bellevue?
Our electrical dispatch fee is $179, which includes a 30-minute diagnostic. Outlet replacement is $104, breaker replacement $171 and ceiling fan replacement $495, priced before any work begins. For comparison, Angi's national average to hire an electrician is $351 (August 2026).
Do you offer same-day or emergency electrical service in Bellevue?
Book 24/7 by phone or online. Our electricians work Monday to Friday, 8 AM to 5 PM, with same-day service when possible. We don't do after-hours electrical work; for sparks, smoke or a downed line, call 911 or PSE first.
Are your Bellevue electricians licensed?
Yes. WA Electrical Contractor License #HOMECCA782DC and WA Contractor Registration #HOMECCA785BD; licensed, bonded and insured in Washington.
Do I need to upgrade from 100 amps for an EV charger or heat pump?
Not always. We check your panel and load first; sometimes a load-managed circuit works, sometimes the service needs an upgrade. Panel and service work needs a permit and the utility.
Is a Federal Pacific or Zinsco panel safe?
These older panels are widely replaced. We inspect the panel and give you a written price to replace it if needed; we install Square D, Eaton and Siemens panels and smart panels.
Do you install and service generators?
Yes, Generac and other major generator brands. Generator maintenance is $465, and we currently offer $1,000 off generators.
Do you do commercial electrical work?
Yes, for homes and businesses.
Which parts of Bellevue do you serve?
All of Bellevue and nearby Redmond, Kirkland, Issaquah, Mercer Island and Newcastle.
Who issues electrical permits in Bellevue?
The City of Bellevue issues and inspects electrical permits, including panel changes, generators and EV chargers. Simple permits with no plan review can often be issued the same day. We pull the required permits for our work.
How much does an electrical diagnostic cost in Bellevue?
Our electrical dispatch fee is $179, which includes a 30-minute diagnostic. Outlet replacement is $104 and breaker replacement is $171, and you get the price before any work begins.
Is there a PSE rebate for an EV charger in Bellevue?
Yes. PSE offers up to $300 for a qualifying ENERGY STAR smart Level 2 charger, more for income-qualified customers. We currently offer $200 off an EV charger install.
Can you add a circuit for a new oven or range?
Yes. We check panel capacity, add the breaker and run a new circuit to the appliance location, with the permit the City of Bellevue requires.
Can I do my own electrical work in Bellevue?
Washington lets homeowners do some electrical work on a home they own and live in, with a permit from the City of Bellevue. For anything you would rather leave to a licensed electrician, we quote the price first.
Do you inspect older Bellevue homes before a remodel?
Yes. A whole-home electrical inspection shows what the panel and circuits can carry before you plan a kitchen, an addition or an EV charger.
Sources: City of Bellevue electrical permits; PSE EV charger rebate (read November 4, 2026); PSE electric service handbook (March 2026); Angi electrician cost (August 2026).
Why Choose Home Comfort Alliance in Bellevue?
Your Comfort is Our Promise
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
Book a Bellevue electrician
Tell us what’s tripping, flickering or not working, and our Redmond team will set up a visit with an upfront price before any work begins.
Get an estimate
We will call you to set up the visit.