





Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • WA Electrical Contractor Lic. #HOMECCA782DC • WA Plumbing Contractor Lic. #HOMECCA751QG • NATE-certified technicians • Carrier Factory Authorized Dealer • Mitsubishi Electric Diamond Dealer • Lennox Premier Dealer
Home Comfort Alliance is a licensed residential plumber serving Mill Creek from our Everett branch. We repair and service water heaters, fix leaks, toilets, faucets and garbage disposals, replace pressure-reducing valves and hose bibs, repipe homes and clear indoor drains. A plumbing visit has a $99 dispatch fee, and the plumber quotes the repair before starting. Our plumbers work Monday to Friday, 8 AM to 5 PM, with same-day service when possible.
Book by phone or online at any time. Call (425) 645-0404, and we schedule the first available visit.
Water leaking right now? Shut off your main water valve first, then book the first available visit.
Call a plumber when you see any of these in your home:
Slow drains in more than one fixture can point to a clog in the main line. Tell us if flushing a toilet backs water into a tub or floor drain when you book.
We do residential plumbing only, in single-family homes and townhomes across Mill Creek.
| Job | What we do | Learn more |
|---|---|---|
| Water heater repair and service | Find the fault, repair it, and service tank and tankless units | Water heater repair |
| Water heater replacement and tankless | Replace tank units and install tankless water heaters | Water heaters |
| Leaks | Find and fix leaks in supply and drain piping | Leak detection and repair |
| Burst and frozen pipes | Repair split and frozen pipes | Burst pipe repair |
| Toilets | Repair or replace running, leaking and loose toilets | Toilet repairs |
| Faucets | Repair or replace kitchen, bath and laundry faucets | Price given on site |
| Garbage disposals | Repair or replace disposals and their drain connections | Garbage disposals |
| Repiping | Whole-home repiping of water lines | Price given on site |
| Pressure-reducing valves | Replace the valve that controls your home's water pressure, with the price given before work | Pressure-reducing valve |
| Hose bibs | Replace leaking or frozen outdoor faucets | Hose bib replacement |
| Indoor drains and hydro jetting | Clear sink, tub, shower and floor drains, and main drain lines from an indoor cleanout | Drain cleaning |
| Water lines | Install and repair residential water lines | Price given on site |
| Gas piping for appliances | Residential gas piping for furnaces, water heaters, ranges and generators | Permit pulled where required |
| Plumbing inspection | Check water pressure, shut-off valves, the water heater, fixtures, visible piping, toilets, hose bibs and washer lines | Plumbing inspection |
We don't do sewer line work. Our drain cleaning covers indoor drains and main lines cleared from an indoor cleanout. See all our plumbing services.
A plumbing visit starts with a $99 dispatch fee. The plumber quotes the repair on site, and you approve the price before any work begins.
| Service | Our price |
|---|---|
| Plumbing dispatch fee | $99 (repairs quoted on site before work) |
| Drain cleaning | $148 (the $99 dispatch fee is charged on top) |
| Hydro jet cleaning (indoor drains) | $399 to $574 |
| Tank water heater service | $230, or $150 added to a furnace, AC or heat pump service |
| Tankless service (no flush) | $230 |
| Tankless flush | $429 |
Prices as of September 2026. Water heater service prices updated November 2026.
Current offers:
See all current special offers.
Regional estimate, Angi Seattle, 2025 data (read Nov 2026): $522 average, normal range $284 to $760. This is a cost guide figure for the Seattle area, not our price.
Financing through Salal Credit Union or Synchrony starts at $179/month* (financing).
*Financing through Salal Credit Union or Synchrony, subject to credit approval. Rates, terms and monthly payments depend on the amount financed, the plan and your credit. 0% interest options are available to qualifying customers. See lender for full terms.
Home Comfort Club members pay less. The Plumbing plan is $15 a month and includes a yearly whole-home plumbing inspection (Home Comfort Club).
Get an estimateA comfort advisor will call you to set up your visit.
We repair, service and replace tank and tankless water heaters in Mill Creek homes. You get up to $300 off water heater installation.
Want a number before anyone visits? You can price a new water heater online. Thinking about going tankless? Read about tankless water heater installation, then ask the plumber about both options at your visit.
If your water heater still works but gives you trouble, start with water heater repair.
The City of Mill Creek requires a permit to replace a water heater and for gas piping. Swapping a sink or toilet without changing the plumbing lines does not need one. We pull the required permits for every installation.
| Work | City permit? |
|---|---|
| Water heater replacement | Yes |
| Gas piping | Yes |
| Sink or toilet replacement with no plumbing line changes | No |
The city's permit counter is at City Hall North, 15720 Main Street, Suite 110, Mill Creek, 425-551-7254. Read the rules in the city's Do I Need a Permit flyer or on its permits page.
Homes outside city limits with a Mill Creek or 98012 address get plumbing permits from Snohomish County Planning and Development Services instead.
Two districts supply water in Mill Creek: Alderwood Water and Wastewater District and Silver Lake Water and Sewer District. Check your water bill to see which one serves your home. Call your district for problems with the water main or meter. Call us for the pipes, valves and fixtures inside your home.
The city lists both districts on its community resources and utilities page. Snohomish County PUD supplies power. Puget Sound Energy supplies natural gas in Snohomish County, so PSE is the utility for a gas water heater.
Smell gas? Leave the house first. Then call 911 and Puget Sound Energy at 1-888-225-5773. Call us once it is safe.
Our plumbers work across Mill Creek, inside city limits and in the nearby unincorporated areas with Mill Creek and 98012 addresses. The team comes from our Everett branch.
Mill Creek is a planned community of homes and townhomes built from the 1970s onward. If your home is in an HOA, its rules can cover outside work, so check before a visit that involves the exterior.
Nearby, we also serve these cities:
For heating, cooling and electrical work in town, see our Mill Creek services page.
Renting? We can book the visit when you're the one paying for it; otherwise we'll take your landlord's details and call them.
In October 2026, our plumbers replaced an older tankless water heater in a Mill Creek home with a Navien NPE-240S2 condensing tankless unit. The work took two days.
The plumber ran new 2 inch PVC intake and vent pipe up through the attic to a concentric vent kit, using the existing roof opening with a new roof jack. The copper water piping was reworked to fit the new connections. The condensate drain went to the existing condensate pump. A new gas shutoff and flex connector were fitted on the 3/4 inch black iron gas line, and the relief valve drain was connected. The plumber then started the unit up.


Yes. Home Comfort Alliance plumbers serve Mill Creek from our Everett branch at 3409 Everett Ave, Everett, which is open for walk-ins Monday to Friday, 8 AM to 5 PM. Call (425) 645-0404 or book online.
Our plumbing dispatch fee is $99. The plumber quotes the repair on site before starting work. Drain cleaning is $148, and the $99 dispatch fee is charged on top of it.
You can book by phone or online at any time, and we schedule the first available visit. Our plumbers work Monday to Friday, 8 AM to 5 PM, with same-day service when possible. If water is leaking, shut off the main water valve first.
Tank water heater service is $230, or $150 when added to a furnace, AC or heat pump service. Tankless service without a flush is $230, and a tankless flush is $429.
Yes. The City of Mill Creek lists water heater replacement and gas piping among the work that needs a permit. Replacing a sink or toilet without changing the plumbing lines does not. We pull the required permits for every installation.
Two districts serve the city: Alderwood Water and Wastewater District and Silver Lake Water and Sewer District. The name on your water bill tells you which one serves your home.
Yes. We also work in the unincorporated areas with Mill Creek and 98012 addresses. Those homes get plumbing permits from Snohomish County Planning and Development Services instead of the city.
Yes, tank and tankless. You get up to $300 off water heater installation, and you can price a new water heater online before we visit.
We clear indoor drains, including main drain lines from an indoor cleanout. We don't do sewer line work, so side sewer repairs need a sewer contractor.
Yes. We do residential plumbing in single-family homes and townhomes. If your home is in an HOA, check whether the association needs to approve outside work before the visit.
Yes. WA Plumbing Contractor Lic. #HOMECCA751QG (residential), and we are licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD).
Yes. We replace residential pressure-reducing valves and hose bibs. The plumber gives you the price before any work begins.
Sources: City of Mill Creek, Do I Need a Permit flyer and Community Resources and Utilities (read November 10, 2026); City of Mill Creek permits (read November 3, 2026); Snohomish County residential building permits (read November 10, 2026); Economic Alliance Snohomish County, utilities (read November 10, 2026); Puget Sound Energy gas safety (read November 3, 2026); Angi, plumber cost in Seattle (2025 data, read November 10, 2026).

Tell us what is leaking, clogged or not heating, and our Everett branch will set up a visit with an upfront price before any work begins.
Get an estimate
We will call you to set up the visit.