Our licensed plumbers repair leaks and drains, replace water heaters and fixtures, and repipe homes across Gig Harbor and the peninsula. They are dispatched from our Sumner branch across the Tacoma Narrows; call (253) 242-5646 or use the form and a coordinator will book the visit. You get a written price before any work starts.
Gig Harbor has grown quickly over the last couple of decades. That leaves a wide spread of plumbing: original systems in older harbor-front homes, and a large number of newer houses whose first water heaters and fixtures are now wearing out.
Seattle-area estimates from Angi, Seattle plumber costs, updated July 2026, not Home Comfort Alliance prices.
| Job | Typical range |
|---|---|
| General plumbing repair | $284 to $760, about $522 typical |
| Plumber hourly rate | $150 to $200 |
| Faucet replacement | $150 to $600 |
| Toilet installation | $300 to $800 |
| Water heater installation | $800 to $2,000 |
| Main water line leak | $600 to $4,500 |
On the peninsula, crawlspace access, long runs to outbuildings and waterfront lots with limited parking can add labor time. We explain the access plan before quoting.
Most of the Gig Harbor peninsula gets its electricity from Peninsula Light Company, a member-owned cooperative (Peninsula Light Company). For a limited time, PenLight residential members can buy a qualifying heat pump water heater with an $1,800 rebate applied instantly at checkout; income-qualified members with pre-approval can receive $3,000. The program is for homes replacing an existing standard electric tank, and for a limited period gas and propane replacements also qualify (PenLight heat pump water heater incentives).
| Type | Best for | Things to know |
|---|---|---|
| Heat pump water heater | Garages, basements and large utility rooms | Uses far less electricity than a standard tank; PenLight rebate; needs a condensate drain |
| Standard electric tank | Tight spaces | Simplest install, highest running cost |
| Gas tank or tankless | Homes with PSE gas service | Needs correct venting and gas line size |
If you buy a heat pump water heater through PenLight’s program, we can install it, including the electrical and condensate work, and pull the permit. A standard tank typically lasts around 8 to 12 years; if yours is in that range and showing rust at the fittings or moisture at the base, replacing it on your schedule, while the PenLight offer is available, beats an emergency replacement after a leak.
Gig Harbor winters are cool and wet. Wind off the water makes cold snaps harder on exposed pipes than the thermometer suggests, and steady rain tests drainage around foundations. Before winter:
Gig Harbor is unusual in how many water systems serve it. The city lists City of Gig Harbor Utilities, Washington Water Service, Rainier View Water, Stroh’s Water and Peninsula Light’s water service among local providers (City of Gig Harbor, local utility providers), and many rural properties on the peninsula use private wells. That affects plumbing in practical ways:
Tell us your water provider or whether you are on a well when you book, and the plumber will arrive with the right parts.
Hose bibs on exposed decks, outdoor showers, irrigation connections and long lines to garages or shops are common on the peninsula. They are also the first to freeze and the hardest to spot when they leak. We replace old hose bibs with frost-free models, add shutoffs so outdoor lines can be drained for winter, and install backflow protection where irrigation ties into household water.
A drain that clogs again and again usually has a cause further down: grease, roots, a belly in the line or a cracked joint. We clear the line and, when problems repeat, recommend a camera inspection so the repair targets the real problem. Homes outside city limits often have septic systems; we tell you when a drain issue points to the septic side so you can call the right specialist.
We rough in and set fixtures for kitchen and bathroom remodels, add laundry or bar sinks, and repipe homes where the original supply lines are failing. Inside Gig Harbor city limits, the city issues the plumbing permit, including a streamlined application for minor residential plumbing work (City of Gig Harbor, building permits, forms and fees); outside city limits, Pierce County issues it. We file the permit and schedule the inspection.
When you book, the coordinator notes what you are seeing so the right parts come on the truck, which matters on the peninsula where a return trip across the bridge costs you time. On site, the plumber finds the cause, explains your options and gives you a written price for each. After the repair, we test for leaks and flow and leave the area clean, with a note of anything else worth watching.
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our plumbing installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and the labor warranty on repairs is extended for as long as your prepaid membership runs, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
Seattle-area data puts most plumbing repairs between $284 and $760, about $522 typical, with plumber rates around $150 to $200 an hour (Angi, 2026). We give a written price before starting.
Yes, for PenLight members: $1,800 off a qualifying model at checkout for a limited time, or $3,000 for pre-approved income-qualified members, when replacing an existing electric tank.
The City of Gig Harbor inside city limits; Pierce County for unincorporated addresses. We file the permit.
Yes. We install it, handle the electrical and condensate connections, and pull the permit.
A running toilet or a hidden crawlspace leak is the usual cause. Turn off all fixtures and watch the meter; if it moves, call us.
Yes, for homes with gas service, along with tank and heat pump water heaters.
We handle the plumbing inside well homes. For the well pump, pressure tank or switch, mention it when booking and we will confirm whether it is work we can take on or point you to a well specialist.
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) get the labor warranty on repairs extended for as long as their prepaid membership runs, up to 5 years from installation.
A Sumner-based coordinator will set up your visit, and our plumber will give you a written price before any work starts.
Get an estimateCall (253) 242-5646