Get an estimate
Two quick steps. A Sumner-based comfort advisor will call you to set up your visit.
- Serving Puget Sound homeowners since 1977
- 4.8 stars from 5,000+ reviews
- Licensed, bonded and insured in Washington
- PSE Trade Ally contractor
- WA Contractor Reg. #HOMECCA785BD
Heating, cooling, plumbing and electrical service in Gig Harbor, WA
Home Comfort Alliance repairs, maintains and installs heating and cooling, plumbing and electrical for Gig Harbor homeowners. Our Sumner branch serves the city and the surrounding peninsula; one call to (253) 242-5646 covers furnaces, heat pumps, ductless mini-splits, air conditioning, water heaters, drains, panels, EV chargers and generators.
Gig Harbor wraps around a sheltered bay just across the Tacoma Narrows Bridge on SR 16. The historic waterfront downtown still has the feel of the old fishing town.
Our Gig Harbor HVAC, Plumbing & Electrical Services
Our Sumner-based team covers every system in your Gig Harbor home. Explore our Gig Harbor services:
Heating
Cooling
Plumbing
Electrical
Nearby, we also serve Tacoma, Lakewood, Port Orchard and Puyallup.
What Gig Harbor homes need
Gig Harbor has been growing quickly. The city has grown quickly, much of it in newer neighborhoods away from the waterfront. The peninsula’s housing runs from older homes near the harbor and view homes on the hillsides to recent subdivisions, so the service calls vary:
- Waterfront and hillside homes: salt air and wind-driven rain are hard on outdoor units, disconnects and exterior fixtures.
- Newer subdivisions: original furnaces, heat pumps and water heaters reaching replacement age, and EV charger installs.
- Rural peninsula properties: backup power for well pumps and heating during outages, and heat pumps replacing electric baseboards.
Utilities and rebates on the peninsula
The City of Gig Harbor lists two energy utilities for the area: Peninsula Light Company and Puget Sound Energy, and its boundary map shows which serves a given address (City of Gig Harbor, local utility providers). Most homes here buy power from Peninsula Light (PenLight), the member-owned co-op that serves Gig Harbor, the Key Peninsula and Fox Island (Peninsula Light Company).
| Program | Who qualifies | Amount (September 2026) |
|---|---|---|
| PenLight heat pump water heater | PenLight residential members replacing an existing electric tank (gas and propane replacements also qualify for a limited time) | $1,800 applied instantly at checkout on qualifying models (limited time); $3,000 for pre-approved income-qualified members |
| PenLight heat pump incentives | PenLight members installing a heat pump through a qualified contractor | Check PenLight’s current amounts; we confirm at the estimate |
| PSE hybrid heat pump | PSE gas customers adding a heat pump to a gas furnace | $1,500, plus up to $2,400 through Efficiency Boost |
Sources: PenLight heat pump water heater incentives; PenLight heat pump incentives and contractor list; PSE hybrid heat pump rebate. Home Comfort Alliance appears on PenLight’s list of ductless and standard heat pump contractors, and is a PSE Trade Ally for HVAC and water heaters.
Permits in Gig Harbor
Inside city limits, the City of Gig Harbor issues mechanical and plumbing permits, including its application for minor residential mechanical work and minor residential plumbing work (City of Gig Harbor, building permits, forms and fees). Electrical permits come from Washington L&I, since Gig Harbor is not on L&I’s list of cities that run their own electrical program (L&I, cities that do their own electrical permits). Many homes with a Gig Harbor mailing address are outside city limits in unincorporated Pierce County, where Pierce County issues the permits. We confirm which office applies to your address and pull the permits for our work.
Where we work around Gig Harbor
We serve homes along the downtown waterfront and Harborview Drive, the neighborhoods up the hill toward Uptown and Gig Harbor North, and the wider peninsula, including Fox Island, Rosedale, Wollochet, Artondale and the Key Peninsula. The same Sumner branch covers Tacoma, Lakewood and University Place across the Narrows.
What do common services cost around Gig Harbor?
Seattle-area and national estimates, not our prices. You get a written price before any work starts.
| Service | Typical range | Source |
|---|---|---|
| Furnace repair | $139 to $544, about $341 | Angi, Seattle furnace repair costs, updated August 2026 |
| New furnace | $2,762 to $6,683, about $4,683 | Angi, Seattle new furnace costs, updated July 2026 |
| Ducted heat pump | $3,160 to $20,000 by efficiency tier | Angi, Seattle heat pump installation costs, updated July 2026 |
| Single-zone ductless mini-split | $2,222 to $5,555 | Angi, Seattle mini-split costs, 2026 data |
Scheduling service on the peninsula
Call (253) 242-5646 or send the form. A comfort advisor from our Sumner office confirms what you need and sets a visit window. Your technician, plumber or electrician diagnoses the problem or measures the home, then gives you written options with prices, and any PenLight or PSE incentive that applies, before starting. We handle permits and inspections for the work that needs them.
Warranty and Home Comfort Club
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and the labor warranty on repairs is extended for as long as your prepaid membership runs, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
Gig Harbor home services FAQ
Does Home Comfort Alliance serve Gig Harbor, WA?
Yes. Our Sumner branch serves Gig Harbor and the surrounding peninsula for heating, cooling, plumbing and electrical work. Call (253) 242-5646.
Who supplies electricity in Gig Harbor?
The city lists Peninsula Light Company and Puget Sound Energy; the city’s boundary map shows which serves your address. PenLight covers most of the Gig Harbor peninsula.
Is there a heat pump water heater rebate in Gig Harbor?
PenLight members can get $1,800 off a qualifying heat pump water heater at checkout for a limited time, or $3,000 if pre-approved as income-qualified.
Who issues permits in Gig Harbor?
The City of Gig Harbor issues mechanical and plumbing permits inside city limits; Pierce County covers unincorporated addresses; L&I issues electrical permits.
Are estimates free?
Yes, for new equipment. Repair visits carry a trip fee, which the advisor tells you when booking.
What warranty comes with your work?
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) get the labor warranty on repairs extended for as long as their prepaid membership runs, up to 5 years from installation.
Ready to get started in Gig Harbor?
A Sumner-based comfort advisor will set up your visit and give you written options, PenLight and PSE incentive help and financing choices.
Get an estimateCall (253) 242-5646Why Choose Home Comfort Alliance in Gig Harbor?
Your Comfort is Our Promise
We promise...
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
