Get an estimate
Two quick steps. A Sumner-based comfort advisor will call you to set up your visit.
- Serving Puget Sound homeowners since 1977
- 4.8 stars from 5,000+ reviews
- Licensed, bonded and insured in Washington
- PSE Trade Ally contractor
- WA Contractor Reg. #HOMECCA785BD
Electrician in Gig Harbor, WA
Our licensed electricians handle repairs, panel and service upgrades, EV chargers, generators and new circuits for homes in Gig Harbor and across the peninsula. They work from our Sumner branch; call (425) 645-0404 or send the form to book.
The City of Gig Harbor lists Peninsula Light Company and Puget Sound Energy as the area’s energy utilities (City of Gig Harbor, local utility providers), with PenLight, a member-owned cooperative, covering most of the peninsula (Peninsula Light Company). Electrical permits for Gig Harbor come from Washington L&I, both inside and outside city limits (L&I, cities that do their own electrical permits). We buy the permit and schedule the inspection for any job that needs one.
Electrician costs
National estimates from Angi, electrician costs, updated August 2026, not our prices. You get a written price and permit plan before work starts.
| Job | Typical range |
|---|---|
| Service visit | $163 to $538, about $351 typical |
| Hourly rate | $50 to $130 |
| Outlet installation | $200 to $300 |
| Ceiling fan | $140 to $350 |
| Breaker box replacement | $500 to $1,800 |
| Whole-house rewiring | $1,500 to $10,000 |
Backup power for peninsula homes
Trees, wind off the water and long overhead lines mean outages are part of life on parts of the peninsula. When the power goes, so can your heat, well pump, sump pump and refrigerator. Options:
- Standby generator with an automatic transfer switch, sized for the whole home or for essential circuits. It starts on its own within seconds of an outage.
- Generator inlet and interlock so a portable generator can safely run selected circuits through the panel.
- Dedicated circuits for well pumps and heating equipment, clearly labeled so they are easy to put on backup power.
Never backfeed a house through a dryer or other outlet. It can energize the utility’s lines and endanger PenLight or PSE crews working to restore power.
Salt air and outdoor equipment
Homes on or near the water face salt-laden air that corrodes exposed metal faster than inland. Outdoor panels, meter bases, disconnects for heat pumps, exterior outlets and light fixtures deserve a look if they are showing rust, sticking covers or tripping GFCIs. We replace corroded equipment with weather-rated enclosures, use in-use covers on outdoor outlets, and seal penetrations so wind-driven rain stays out.
Panels and service upgrades
- Breakers that trip under normal loads, or a panel that is warm, buzzing or scorched.
- No space for new circuits.
- Service size too small for an EV charger, heat pump or shop.
- Older panel brands with known problems, which our electrician will flag.
For a service upgrade, we coordinate the disconnect and reconnect with your utility, PenLight or PSE, pull the L&I permit and label every circuit.
EV chargers
Commuting across the Narrows makes home charging practical for many Gig Harbor drivers. A Level 2 charger on a dedicated 240-volt circuit covers most daily driving overnight, and a charger with scheduling lets you charge at night when household demand is low. We check panel capacity first, size the circuit to the charger, and use load management where the panel is tight. PenLight also runs electric vehicle programs for members; see its site for current details (Peninsula Light Company).
Heat pump and water heater circuits
PenLight offers incentives to members for heat pumps and heat pump water heaters (PenLight heat pump incentives and contractor list; PenLight heat pump water heater incentives). Each needs its own correctly sized circuit, and a heat pump also needs an outdoor disconnect. When our HVAC or plumbing teams install the equipment, our electricians do the wiring in the same job and price, so one company is responsible for the whole install.
Shops, docks and outbuildings
Detached garages, workshops, studios and boathouses need a correctly sized feeder, a local disconnect, GFCI protection and wiring rated for wet or damp locations. On sloped and waterfront lots we plan trench routes and conduit carefully, and quote them up front. Where a building sits far from the house, we size the feeder for voltage drop as well as load, so tools and heaters perform properly at the far end, and we add a subpanel so circuits in the outbuilding can be shut off locally.
Older homes near the harbor
Gig Harbor was a small fishing town for much of its history. Houses from those decades near the waterfront and downtown have often been added onto several times. Electrical work in them tends to turn up:
- Ungrounded two-prong circuits, or three-prong outlets added without a ground.
- Small services of 60 to 100 amps feeding modern kitchens and laundry.
- Additions wired off whatever circuit was closest.
- Connections made outside junction boxes in attics and crawlspaces.
We sort findings into what should be fixed now for safety, what to plan for, and what can wait, each with a price, rather than recommending a full rewire by default.
Remodels, ADUs and view-home lighting
Kitchen and bath remodels, finished lower levels and accessory dwelling units each change the load and the code requirements: dedicated appliance circuits, GFCI and AFCI protection, and often a subpanel. We plan early with you and your builder, confirm whether the service can carry the new load, and pull the L&I permit. For view homes, we also install exterior and landscape lighting on timers or photocells, and dimmable interior lighting that does not reflect on the glass at night.
Surge protection and smart panels
Storms and utility switching send voltage spikes through household wiring, and the electronic boards in furnaces, heat pumps, water heaters and appliances are the first to suffer. A whole-home surge protector at the panel is an inexpensive layer of protection, and it pairs with plug-in protectors for computers and entertainment equipment. Smart breakers and panel monitors add another benefit: they show which circuits use the most power, which helps when you are planning a heat pump, EV charger or generator and want to know how much capacity is really left.
Booking an electrician on the peninsula
Tell us what is happening, or what you plan to add, when you call. A photo of the panel label and main breaker helps us send the right electrician with the right parts, which saves you a second trip across the bridge. The electrician inspects the panel and circuits involved, gives you a written price that includes any permit, completes the work, and arranges the L&I inspection when it is required. You also get a note of anything else worth watching, such as a corroded outdoor disconnect or an overloaded circuit.
Repairs and safety checks
- Dead outlets, flickering lights, and switches that spark or run warm.
- GFCI protection in kitchens, bathrooms, garages, laundry areas and outdoors.
- Smoke and carbon monoxide alarms.
- Lighting, ceiling fans, recessed and exterior lighting.
- Whole-home surge protection.
- Electrical inspections before buying or selling, with a written list of findings and prices.
Warranty and Home Comfort Club
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our electrical installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and the labor warranty on repairs is extended for as long as your prepaid membership runs, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
Gig Harbor electrician FAQ
Who issues electrical permits in Gig Harbor?
Washington L&I, both inside and outside city limits. We buy the permit and schedule the inspection.
Who supplies electricity in Gig Harbor?
Peninsula Light Company covers most of the peninsula; the city also lists Puget Sound Energy. The city’s boundary map shows which serves your address.
How much does an electrician cost in Gig Harbor?
National data puts a typical service visit between $163 and $538, about $351 (Angi, 2026). We give a written price before starting.
Do you install standby generators on the Gig Harbor peninsula?
Yes. We install standby generators with transfer switches, and inlets with interlocks for portable generators.
Can salt air damage my outdoor electrical equipment?
Yes. Near the water, corrosion shows up on outdoor panels, disconnects and outlets. Weather-rated replacements and in-use covers help.
Will my panel handle an EV charger?
Often. We run a load calculation first and use load management where the panel is tight.
Do I need to rewire an older Gig Harbor home?
Rarely all at once. We prioritize safety fixes, then items to plan for, each priced separately.
What warranty comes with your work?
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) get the labor warranty on repairs extended for as long as their prepaid membership runs, up to 5 years from installation.
Get an electrical estimate in Gig Harbor
A Sumner-based coordinator will book a licensed electrician, and you get a written price and permit plan before work starts.
Get an estimateCall (425) 645-0404Why Choose Home Comfort Alliance in Gig Harbor?
Your Comfort is Our Promise
We promise...
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
