Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • WA Electrical Contractor Lic. #HOMECCA782DC • NATE-certified technicians • Carrier Factory Authorized Dealer • Mitsubishi Electric Diamond Dealer • Lennox Premier Dealer
Heating repair and service in Silverdale, WA
Home Comfort Alliance repairs, maintains and replaces gas and electric furnaces, heat pumps, ductless mini splits and baseboard heat in Silverdale, with technicians sent from our Bremerton branch. We find the cause, explain it plainly, and give you a written price before any repair begins.
Need a repair now? See furnace repair in Silverdale or heat pump repair in Silverdale for prices, common fixes and after-hours help.
Silverdale homes heat several different ways. Electricity comes from Puget Sound Energy and natural gas, where the street has it, from Cascade Natural Gas (Kitsap Economic Development Alliance, infrastructure). So around Dyes Inlet you will find gas furnaces, electric furnaces, baseboards and heat pumps, and the right repair or replacement depends on which one you have and which utility serves it.
Quick answer: book a diagnostic if the house won’t reach temperature, the system short-cycles, or it makes new noises. For equipment 15 or more years old facing a major repair, we price replacement alongside the repair so you can choose.
What heating repair costs
These are regional estimates from Seattle-area data; there is no Silverdale-specific survey.
| Repair | Typical range |
|---|---|
| Most furnace repairs | $139 to $544, about $341 typical |
| Wider range seen | $97 to $2,000 |
| Flame sensor | $160 to $270 |
| Blower motor | $160 to $2,160 |
| Heat exchanger | $110 to $1,620 |
Source: Angi, Seattle furnace repair costs, updated August 2026. Regional estimate, not a quote. Heat pump repairs vary by part and brand and are quoted after testing.
Get an estimateA comfort advisor will call you to set up your visit.
Heating problems we fix
- Gas furnace won’t ignite or locks out: flame sensor, igniter, pressure switch, inducer motor or a blocked condensate line.
- Electric furnace blowing cool air: failed heating elements, sequencers or limit switches.
- Heat pump iced up or short on heat: defrost faults, low refrigerant from a leak, or thermostat settings that run backup strips too often.
- Ductless head showing an error code: sensor, communication or drain faults.
- Baseboard heaters not working: thermostats, elements, breakers or scorched connections.
- One room always cold: usually a duct, return air or damper problem rather than the furnace.
Heat pumps for Silverdale homes
If your heating system is due for replacement, a heat pump is worth pricing. It heats efficiently through Kitsap County’s mild, damp winters and also cools on hot days. Common setups:
- Ductless mini splits for homes heated by baseboards or wall heaters, with no ductwork to build.
- Ducted heat pumps where an electric furnace and good ductwork are already in place.
- Dual fuel for Cascade gas homes: a heat pump carries most of the season and the gas furnace covers the coldest hours.
For PSE electric customers replacing baseboards, wall heaters or an electric furnace, PSE offers $1,500, plus up to $2,400 through Efficiency Boost, toward a qualifying heat pump (PSE electric resistance to heat pump rebate). Cascade Natural Gas pays $1,600 for a 95% AFUE gas furnace or $2,400 at 98% AFUE, installed on or after March 15, 2026; a furnace used only as backup for a heat pump does not qualify (Cascade Natural Gas residential rebates). PSE’s hybrid and gas conversion rebates are for PSE gas customers, so they don’t apply to Cascade gas homes. Home Comfort Alliance is a PSE Trade Ally approved contractor for HVAC systems. The federal 25C tax credit ended December 31, 2025.
Repair or replace?
| Situation | What we usually advise |
|---|---|
| Under 10 years old, one part failed | Repair |
| 10 to 15 years, moderate repair | Repair and start planning |
| 15 years or more, major repair | Get a replacement price too |
| Cracked heat exchanger | Replace; it is a carbon monoxide risk |
| Repeated repairs in two seasons | Compare replacement |
See furnace replacement in Silverdale and air conditioning and heat pumps in Silverdale. Replacement estimates are free.
Airflow, ducts and thermostats
Many heating complaints are really airflow problems: an overdue filter, a blocked return, or a crushed or disconnected duct in the crawlspace. Low airflow makes a furnace overheat and shut off on its safety limit and makes a heat pump work harder. We measure static pressure and temperature rise before recommending duct work. On heat pumps, we also check the thermostat, because the wrong settings can bring on electric backup heat every time you raise the temperature a couple of degrees, which makes a heat pump cost almost as much to run as baseboards.
Maintenance
A fall service catches most failures before the first cold week. On a gas furnace we clean and test the burners, flame sensor and igniter, check the flue and venting, measure gas pressure and temperature rise, test safety switches and clear the condensate drain. On a heat pump we check refrigerant pressures, clean the outdoor coil, test defrost and backup heat and tighten connections. Change filters every one to three months and keep moss and leaves clear of outdoor units. Home Comfort Club members get the extended repair labor warranty described below.
Permits and safety
Replacing heating equipment in unincorporated Silverdale needs a residential mechanical permit from Kitsap County DCD, whose permit form covers furnaces, heat pumps and ductless systems (Kitsap County DCD, residential mechanical and plumbing permit form); electrical work is permitted through Washington L&I (Kitsap County DCD, Do I Need a Building Permit?). Part-for-part repairs don’t need a permit. Every gas repair we do ends with a carbon monoxide check before we leave. If a CO alarm sounds, get everyone outside and call 911 and Cascade Natural Gas before calling us.
How a heating service call works
When you call the Bremerton branch at (425) 645-0404 or send the form, a comfort advisor sets a visit window that suits you. Here is what happens next:
- Listen first. The technician asks what you noticed: no heat, short cycling, a new noise, a smell, or a bill that jumped.
- Test, not guess. We check the thermostat, power, filter, ignition, flame sensor, pressure switch, blower and, on heat pumps, refrigerant pressures and the defrost board.
- Written price before work. You get the diagnosis and a written price for each option. Nothing is done until you approve it.
- Repair and safety check. After the repair we run the system through a full cycle and do a combustion and carbon monoxide check on gas equipment.
- Plain summary. You get notes on what we found, what we fixed, and anything to watch.
Most repairs are finished on the first visit when the part is on the truck. If a part has to be ordered, we tell you how long it will take and what we can do to keep the house warm in the meantime.
Gas, electric or dual fuel in Silverdale
Silverdale homes are heated three main ways, and the right repair or upgrade depends on which you have:
- Gas furnace (Cascade Natural Gas). Common in newer subdivisions with gas service. Repairs focus on ignition, venting and airflow. Cascade pays $1,600 for a 95% AFUE furnace or $2,400 at 98% AFUE installed on or after 15 March 2026; a furnace used only as heat pump backup does not qualify.
- Electric furnace or baseboard (PSE electricity). Often the most expensive heat to run. These homes are the ones that qualify for PSE’s electric-resistance-to-heat-pump rebate.
- Heat pump or dual fuel. A heat pump handles most of the season and, in a dual-fuel setup, a gas furnace takes over in the coldest weather.
If you are not sure which system you have, the technician will tell you on the first visit and explain the options that fit your home and budget.
Warranty and Home Comfort Club
We support the manufacturer’s warranty on covered equipment parts, and we stand behind our heating installations with a 1-year labor warranty from installation.
Join our Home Comfort Club, a monthly membership starting at $15 a month, and a new system we install gets extended labor coverage for as long as your membership stays active, up to 5 years from installation. Ask your technician or comfort advisor for the current plan details.
Silverdale heating FAQ
How much does furnace repair cost in Silverdale?
Seattle-area data puts most furnace repairs between $139 and $544, about $341, with larger repairs up to about $2,000 (Angi, August 2026). We give a written price after diagnosis.
Who supplies gas in Silverdale?
Cascade Natural Gas, where gas service is available. Electricity comes from PSE. That is why PSE’s gas-only rebates don’t apply here but PSE’s electric-to-heat-pump rebate can.
Is there a heat pump rebate in Silverdale?
Yes, for PSE electric customers replacing electric resistance heat: $1,500, plus up to $2,400 through Efficiency Boost (as of September 2026). Cascade gas customers can get $1,600 or $2,400 for a 95% or 98% AFUE furnace; a furnace used only as heat pump backup does not qualify.
Do I need a permit to replace my furnace in Silverdale?
Yes. A residential mechanical permit from Kitsap County DCD, plus an L&I electrical permit if wiring changes. We handle both.
How often should heating be serviced?
Once a year, ideally in early fall. Heat pumps that also cool benefit from a spring check.
How long does a heating repair take?
Most repairs take one to three hours once the problem is found. If a part must be ordered, we tell you the wait and how we can keep the house warm until it arrives.
Do you repair heat pumps and furnaces in Silverdale?
Yes. Our Bremerton branch repairs gas furnaces, electric furnaces, heat pumps, dual-fuel systems and ductless mini-splits across Silverdale.
What warranty comes with your work?
We support the manufacturer’s warranty on covered equipment parts, and our labor warranty covers installations for 1 year from installation. Home Comfort Club members (monthly membership starting at $15 a month) with a new system installed by Home Comfort Alliance get extended labor coverage for as long as their membership stays active, up to 5 years from installation.
Why Choose Home Comfort Alliance in Silverdale?
Your Comfort is Our Promise
We promise...
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
Get a heating estimate in Silverdale
A Bremerton-based comfort advisor will set up your visit, and our technician will give you a written price before any work starts.
Get an estimate
A Bremerton-based comfort advisor will call you to set up your visit.