Locally-owned since 1977 • Licensed, bonded and insured in Washington (WA Contractor Reg. #HOMECCA785BD) • WA Electrical Contractor Lic. #HOMECCA782DC • NATE-certified technicians • Carrier Factory Authorized Dealer • Mitsubishi Electric Diamond Dealer • Lennox Premier Dealer
Heat pump installation in Kent, WA
Home Comfort Alliance installs and replaces ducted, ductless and hybrid heat pumps in Kent from our Sumner headquarters, with a room-by-room Manual J load calculation and the required permits on every installation. PSE supplies Kent's electricity and natural gas, so every PSE heat pump rebate can apply. We are a PSE Trade Ally, estimates are free, and we handle the rebate paperwork for you.
Call (425) 645-0404 or book online. Need a repair instead? See heat pump repair in Kent.
Is a heat pump right for your Kent home?
Usually, yes. A heat pump heats and cools with one system, and what you heat with today decides the best setup and the PSE rebate.
| What you heat with today | Usual heat pump option | PSE rebate to check |
|---|---|---|
| Electric baseboards or wall heaters | Ductless mini-split, or ducted if you have ducts | $1,500 electric resistance conversion |
| Electric furnace | Ducted heat pump on the existing ducts | $1,500 electric resistance conversion |
| PSE gas furnace | Hybrid (dual fuel): heat pump plus your furnace | $1,500 hybrid; $4,000 if income-qualified and switching off gas |
| Older heat pump, out of warranty | Cold-climate ducted replacement | $1,500 heat pump upgrade |
| Oil furnace | Ducted heat pump | We check current programs for you |
Ducted, ductless and hybrid heat pumps in Kent
- Ducted heat pumps replace a furnace or air handler and use your existing ductwork.
- Ductless mini-splits mount on the wall, one indoor unit per zone. They suit baseboard-heated homes, additions and bonus rooms (ductless systems, baseboard to heat pump).
- Hybrid (dual fuel) systems pair a heat pump with a gas furnace, which takes over on the coldest days (how dual fuel works, gas to heat pump conversion).
We are a Mitsubishi Electric Diamond Dealer, Carrier Factory Authorized Dealer, Lennox Premier Dealer and Quilt dealer, and we service all major brands.
Sizing for Kent winters, valley and hill
Kent's winter design temperature is 21°F (City of Kent building design criteria). We size every heat pump to it with an ACCA Manual J load calculation, room by room, rather than matching the old equipment. Homes on East Hill and around Lake Meridian sit higher than the Kent Valley floor and see colder nights, so we often recommend cold-climate heat pumps that keep heating well below freezing.
What a heat pump costs in Kent
Your price depends on the system type, the size your home needs, ductwork and electrical work, and where the outdoor unit goes. Get a price range in about 30 seconds with our free instant quote tool, then a technician confirms the exact price on a free in-home estimate. More detail: heat pump cost guide.
Regional benchmark, not our price: Angi lists Seattle-area heat pump installations at about $6,667 to $13,852, averaging $10,218 (updated July 8, 2026, Angi).
PSE rebates for Kent heat pumps (as of October 2026)
Puget Sound Energy supplies electricity and natural gas in Kent.
| PSE program | Amount | Who qualifies |
|---|---|---|
| Electric resistance to heat pump | $1,500, plus up to $2,400 Efficiency Boost | Homes heated by baseboards, wall heaters or an electric furnace (ducted, or fully ductless) |
| Hybrid heat pump (dual fuel) | $1,500 | PSE gas furnace homes; ducted; balance point 30°F or lower |
| Heat pump to heat pump upgrade | $1,500 | Out-of-warranty, centrally ducted all-electric heat pumps; cold-climate equipment |
| Income-qualified gas to heat pump | $4,000 | Income-qualified PSE gas customers; ducted or ductless; apply within 30 days of install |
| Instant discount | $300, $400 or $600 | Qualifying new heat pumps, by efficiency tier; one unit per retrofit |
Ductless systems qualify for the electric resistance conversion and the income-qualified gas switch, but not for the hybrid or upgrade rebates. Some PSE rebates cannot be combined, so we check which option pays you the most. The federal 25C tax credit ended for equipment installed after December 31, 2025. Home Comfort Alliance is a PSE Trade Ally, and we handle the rebate paperwork for you (PSE rebates).
Financing through Salal Credit Union or Synchrony starts at $179/month* (financing).
*Financing through Salal Credit Union or Synchrony, subject to credit approval. Rates, terms and monthly payments depend on the amount financed, the plan and your credit. 0% interest options are available to qualifying customers. See lender for full terms.
Get a free estimateAn in-home visit and a written, upfront price before any work begins.
Permits in Kent
The City of Kent issues the residential mechanical permit to replace or alter heating and cooling systems, through its online permitting portal or at the Permit Center, 400 W. Gowe, (253) 856-5300 (City of Kent mechanical permits). Electrical permits come from Washington L&I, because Kent is not on L&I's list of cities that run their own electrical inspections. Kent addresses outside city limits go through King County. We plan the outdoor unit's spot on the estimate visit, and we pull the required permits for every installation.
Electrical panel check
A heat pump needs a dedicated circuit, and some older panels lack the space or capacity. We check your panel on the estimate visit, and our licensed electricians handle any upgrade (panel upgrades, WA Electrical Contractor Lic. #HOMECCA782DC).
Replacing an older Kent heat pump
Signs it is time: frequent repairs, weak heat in cold weather, rising bills, or a system that uses R-22 refrigerant. If your heat pump is out of warranty and centrally ducted, PSE's $1,500 upgrade rebate can help. Not sure? Read repair or replace a heat pump, or book a repair visit and get both prices in writing (heat pump replacement).
How installation works
- A free in-home estimate.
- A room-by-room Manual J load calculation.
- Written options and prices, with the PSE rebates each one qualifies for.
- We pull the City of Kent mechanical permit and the L&I electrical permit.
- Install day, start-up and commissioning, and a walkthrough. Most heat pump installations take between 4 and 10 hours, depending on the system type and how many systems we install.
- Permit inspection, rebate paperwork and first-year maintenance included.
Warranty and Home Comfort Club
New installations come with a 3-year Comfort Shield labor warranty on new installations, kept active with yearly maintenance. First-year maintenance is included. Home Comfort Club members with a new system installed by Home Comfort Alliance get extended labor coverage for up to 5 years from installation.
Home Comfort Club plans are $15 a month per trade (HVAC, plumbing or electrical) or $30 a month for all three, with yearly maintenance or inspections and member pricing (membership plans).
Where in Kent we install
We install heat pumps across Kent, including East Hill, Kent Valley, Downtown Kent and Lake Meridian. Nearby, see heat pumps in Auburn.
A recent Kent heat pump installation
In September 2026 we replaced an older system in an East Hill home in Kent with a Lennox EL196UH high-efficiency gas furnace and an EL18KSLV variable-speed heat pump, a matching indoor coil, a Honeywell F100 media air cleaner and a Lennox smart thermostat.
The outdoor unit sits on a wall bracket, and the crew ran new thermostat wire so the system communicates from end to end. The heat pump handles the cooling and most of the heating, with the furnace backing it up on the coldest days.
Kent heat pump installation FAQ
How much does heat pump installation cost in Kent?
Your price depends on your home's heating and cooling needs, the add-ons you need, how many rooms the system serves and where it's installed. Get a price range in about 30 seconds with our free instant quote tool, then a technician confirms the exact price on a free site visit. For reference, Angi puts the Seattle-area average at $10,218 (July 2026), before rebates.
What PSE rebates can I get for a heat pump in Kent?
Kent homes are on PSE, so the main options are $1,500 to replace electric resistance heat, $1,500 to add a heat pump to a PSE gas furnace, $1,500 to upgrade an out-of-warranty ducted heat pump, and $4,000 for income-qualified gas customers switching to a heat pump. A $2,400 income-based boost can add to the first three. Amounts checked October 2026.
Is there an instant discount?
Yes. If your equipment qualifies, PSE's instant discount ($300, $400 or $600 by efficiency tier) comes straight off your invoice. We check which option pays you the most.
Does a ductless mini-split qualify for a PSE rebate?
Yes for the $1,500 electric resistance conversion when the system is fully ductless, and for the $4,000 income-qualified gas switch. Ductless systems don't qualify for the hybrid or heat pump upgrade rebates.
Can I keep my gas furnace and add a heat pump?
Yes. A hybrid system lets the heat pump do most of the heating and the furnace take over on the coldest days. PSE pays $1,500 for adding a ducted heat pump to a PSE gas furnace.
Do I need a permit for a heat pump in Kent?
Yes. The City of Kent issues the mechanical permit and Washington L&I issues the electrical permit. Kent addresses outside city limits go through King County. We pull the required permits for every installation.
Will a heat pump keep my East Hill home warm in a cold snap?
A correctly sized cold-climate heat pump heats well through Western Washington winters. We size every system to Kent's 21°F winter design temperature with a room-by-room Manual J load calculation and can pair it with backup heat or your gas furnace.
Will I need an electrical panel upgrade?
Sometimes. We check your panel at the estimate, and our licensed electricians handle any upgrade (WA Electrical Contractor Lic. #HOMECCA782DC).
Should I repair or replace my old heat pump?
If it's older, uses R-22 or needs frequent repairs, replacing it usually makes more sense, and PSE's upgrade rebate may apply. See heat pump repair in Kent for repair prices; replacement estimates are free.
What warranty comes with a new heat pump?
A 3-year Comfort Shield labor warranty on new installations, kept active with yearly maintenance. First-year maintenance is included. Home Comfort Club members with a new system installed by Home Comfort Alliance get extended labor coverage for up to 5 years from installation.
Which brands do you install in Kent?
We're a Mitsubishi Electric Diamond Dealer, a Carrier Factory Authorized Dealer, a Lennox Premier Dealer and a Quilt dealer, and we service all major brands. We install across Kent, including East Hill, Kent Valley, Downtown Kent and Lake Meridian. Our phones are answered and bookings are accepted 24/7.
How long does heat pump installation take?
Most heat pump installations take between 4 and 10 hours, depending on the system type and how many systems we install.
Sources: PSE heat pump rebates (read October 29, 2026); City of Kent residential mechanical permit; City of Kent building design criteria (winter design temperature 21°F); Washington L&I city electrical list; Angi, Seattle heat pump cost (updated July 8, 2026).
Why Choose Home Comfort Alliance in Kent?
Your Comfort is Our Promise
Reliable heating, air conditioning, plumbing and electrical service, all from one trusted company.
To educate and guide you through your options so you’ll find the right solution at the right price.
Knowledgeable and respectful workers who ensure both your own comfort during the installation process, and lasting comfort from your home systems.
Outstanding service, communication, and follow-up, so your home is comfortable now and for years to come.
Ready to get started in Kent?
Tell us what you need, and our Sumner team will set up an installation estimate or a repair visit with a written, upfront price.
Get an estimate
We will call you to set up the visit.